Form deck economically supports concrete floor construction

Form Deck

Economically supports your concrete floor construction

Form deck facilitates your building process and helps contain costs

Form deck is a workhorse in floor construction, used extensively as an economical form to support concrete slabs during erection. In some cases, form deck eliminates the need for expensive temporary deck shoring.

Form deck is available in lengths from 6’-0” to 40’-0”. Please check with your local New Millennium facility for lengths outside these parameters. Yield strength up to 80ksi. Refer to published tables for the minimum yield strength for each deck type. Contact New Millennium for availability of higher yield strengths when required or use our deck specification tool to view load tables with commonly available non-standard yield strengths and/or gages.

Deck Design Drawings

UL- and ULC-approved. Listed in the UL and ULC Fire Resistance directories
Conforms to ASTM A1008/ A1008M for uncoated and painted deck, A653/A653M for galvanized deck
Meets required steel deck certifications in accordance with Steel Deck Institute specifications

0.6FD, 0.6FDV Form Deck

Type 0.6FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. Specifying 0.6FD deck may eliminate the need for expensive temporary shoring. Floor systems using 0.6FD deck are among the most economical floors available.

Available with nested side laps only
Available as a vented deck, type 0.6FDV is manufactured with slot vents in the bottom flutes, the openings equal 0.5% of total surface
0.6FD and 0.6FDV are UL-approved; 0.6FD is ICC-approved

1.0FD, 1.0FDV Form Deck

Type 1.0FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. Specifying 1.0FD deck may eliminate the need for expensive temporary shoring. Floor systems using 1.0FD deck are among the most economical floors available.

Available with nested side laps only
Available as a vented deck, type 1.0FDV is manufactured with slot vents in the bottom flutes, the openings equal 0.5% of total surface
1.0FD and 1.0FDV are UL-approved; 1.0FD is ICC-approved

EHD-Dek, EHDV-Dek Form Deck

EHD-Dek is a 1 5⁄16” deep, permanent form deck system for reinforced concrete (145 pcf normal weight) slabs. The deck system also can be used as a roof or lightweight insulating concrete roof deck system.

EHD-Dek Form Deck

EHDV-Dek Form Deck

Available in four steel gage thicknesses
Available as a vented deck, type HDV-Dek is manufactured with slot vents in the bottom flutes, the openings can be adjusted from .25% to .75%
Type EHD-Dek and EHDV-Dek are ICC- and UL-approved
Manufactured at our Memphis plant only

1.5FD Form Deck

Type 1.5FD form deck is used extensively in floor construction as an economical form to support concrete slabs during construction. Specifying 1.5FD deck may eliminate the need for expensive temporary shoring. Floor systems using 1.5FD deck enable the designer to space the structural members to over 10’-0” on center.

Available with nested side laps only
1.5FD is ICC- and UL-approved

1.5FDR, 1.5FDV, 1.5FDI, 1.5FDIV Form Deck

Type 1.5FDR form deck is also used in floor construction as an economical form to support concrete slabs during construction. Specifying 1.5FDR deck may eliminate the need for expensive temporary shoring. Floor systems using 1.5FDR deck enable the designer to space the structural members to over 10’-0” on center.

1.5FDR, 1.5FDV, 1.5FDI, 1.5FDIV Dimensions

Types 1.5FDR and 1.5FDV available with nested side laps, types 1.5FDI and 1.5FDIV available with interlocking side laps
Available as a vented deck, types 1.5FDV and 1.5FDIV are manufactured with slot vents in the bottom flutes, the openings can be specified from 0.5% to 1.5% of total surface
Also available with rolled-in hanger tabs (non-vented types only)
1.5FDR, 1.5FDV,1.5FDI and 1.5FDIV are UL-approved; 1.5FDR and 1.5FDI are ICC-approved

2.0FD Form Deck

Type 2.0FD form deck is used in floor construction as an economical form to support concrete slabs during construction. Floor systems using 2.0FD deck enable the designer to space the structural members to over 14’-0” on center without any additional shoring.

Available with interlocking side laps only (extended side laps can be provided upon request to facilitate screw installation)
Also available with rolled-in hanger tabs
2.0FD Form Deck is ICC and UL approved

3.0FD Form Deck

Type 3.0FD form deck is used in floor construction as an economical form to support concrete slabs during construction. Floor systems using 3.0FD deck enable the designer to space the structural members to over 16’-0” on center without any additional shoring.

Available with interlocking side laps only (extended side laps can be provided upon request to facilitate screw installation)
Also available with rolled-in hanger tabs
3.0FD Form Deck is ICC and UL approved

Steel deck design tools

Start here for easier steel deck specification and how to find the most cost-effective steel deck for your project.

Design now

Credit hour: Steel building systems

Learn more about structural steel joist and deck systems and how to effectively integrate aesthetics, performance and sustainability.

Earn credit

Improve design, reduce costs

Use our BIM tool to optimize your project’s cost and performance, as well as reduce RFIs and streamline communication.

Learn more

Case Study

Well Spring, a Life Plan Community in Greensboro, NC

Perfecting the form

Expansion of senior living community’s dining room involved intricate erection. Form deck facilitated the process.

Steel deck brochure

Get our brochure for complete, up-to-date information about our steel roof deck and related components.

Download now

Building success together